update to utilize a proper off-axis projection including a demo scene to prototype all systems

src/main.rs

@@ -41,8 +41,8 @@ fn main() {
 
         .add_startup_system(offaxis_camera_setup)
         .add_plugin(CameraProjectionPlugin::<OffAxisProjection>::default())
-        .add_system(update_offaxis)
         .add_system(simulate_viewer)
+        .add_system(apply_viewer_to_projections)
         .run();
 }
 

src/offaxis.rs

@@ -12,31 +12,21 @@ use crate::projection::*;
 #[derive(Component, Debug, Clone, Reflect)]
 #[reflect(Component, Default)]
 pub struct OffAxisProjection {
-    near: f32,
     pub far: f32,
-    aspect: f32,
+    pub projection_matrix: Mat4
 }
 
 impl CameraProjection for OffAxisProjection {
     fn get_projection_matrix(&self) -> Mat4 {
-
+        self.projection_matrix
-
-        make_projection_rh_custom(45.0_f32.to_radians(), self.aspect, self.near, self.far)
-
-        // Mat4::perspective_rh(45.0_f32.to_radians(), 
-        //     self.aspect, 
-        //     self.near, 
-        //     self.far)
-
     }
 
     // what to do on window resize
     fn update(&mut self, width: f32, height: f32) {
-        self.aspect = width / height;
+        // self.aspect = width / height;
     }
 
     fn far(&self) -> f32 {
-        println!("Z-Value");
         self.far
     }
 }
@@ -44,9 +34,8 @@ impl CameraProjection for OffAxisProjection {
 impl Default for OffAxisProjection {
     fn default() -> Self {
         Self {
-            near: 0.1,
             far: 1000.0,
-            aspect: 1.5,
+            projection_matrix: make_projection_rh_custom(45.0f32.to_radians(),1.3f32, 1.0, 1000.0)
         }
     }
 }

src/projection.rs

@@ -1,5 +1,5 @@
 use bevy::prelude::*;
-use bevy::math::Mat4;
+use bevy::math::{Mat4, Quat, Affine3A};
 
 /// creates a conventional projection matrix from frustum planes
 /// 
@@ -86,15 +86,24 @@ pub fn create_offaxis_matrices(
 
     // println!("Dist {}",dist);
 
-    let z_near = 0.001_f32.max(dist - 0.01);
+    // small offset for the near plane 
+    let min_near_distance_offset = 0.01f32;
 
-    let left = vec_right_normalized.dot(frustum_left) * z_near / dist;
+    // set a minimal near distance
-    let right = vec_right_normalized.dot(frustum_right) * z_near / dist;
+    let min_near_distance = 0.00001f32;
-    let bottom = vec_up_normalized.dot(frustum_left) * z_near / dist;
-    let top = vec_up_normalized.dot(frustum_up) * z_near / dist;
 
-    // println!("l r b t {} {} {} {}",left,right,bottom,top);
+    // calculate a reasonable near distance
+    let z_near = min_near_distance.max(dist - min_near_distance_offset);
 
+    // distances 
+    let left = vec_right_normalized.dot(frustum_left) * z_near / dist;  // left screen edge
+    let right = vec_right_normalized.dot(frustum_right) * z_near / dist;    // right screen edge
+    let bottom = vec_up_normalized.dot(frustum_left) * z_near / dist;   // bottom screen edge
+    let top = vec_up_normalized.dot(frustum_up) * z_near / dist;    // distance eye from screen
+
+    info!("l r b t {} {} {} {}",left,right,bottom,top);
+
+    // create a view frustum
     let projection_matrix = make_projection_rh_from_frustum_reversed(left,right,bottom,top,z_near,z_far);
 
     let view_matrix_rotation = Mat4::from_cols(
@@ -104,6 +113,11 @@ pub fn create_offaxis_matrices(
         Vec4::W
     );
 
+    let rotation_quat = Quat::from_mat4(&view_matrix_rotation); /// Quat::from_mat4(view_matrix_rotation);
+
+    info!("Rotation Mat {:?}",view_matrix_rotation);
+    info!("Viewer Rotation {:?}",rotation_quat);
+
     let view_matrix_eye = Mat4::from_cols(
         Vec4::X,
         Vec4::Y,
@@ -111,8 +125,10 @@ pub fn create_offaxis_matrices(
         (-pos_eye).extend(1.0)        
     );
 
+    // create resulting view matrix (this should be much simpler using glam API)
     let view_matrix = view_matrix_rotation * view_matrix_eye;
 
+    // return tuple of view and projection
     (view_matrix,projection_matrix)
 }
 

src/scene.rs

@@ -77,7 +77,7 @@ pub fn build_scene(
 ) {
     // plane
     commands.spawn(PbrBundle {
-        mesh: meshes.add(Mesh::from(shape::Plane { size: 5.0 })),
+        mesh: meshes.add(Mesh::from(shape::Plane { size: 4.0 })),
         material: materials.add(Color::rgb(0.3, 0.5, 0.3).into()),
         ..default()
     });
@@ -95,7 +95,7 @@ pub fn build_scene(
             shadows_enabled: true,
             ..default()
         },
-        transform: Transform::from_xyz(4.0, 8.0, -4.0),
+        transform: Transform::from_xyz(4.0, 1.0, -4.0),
         ..default()
     });
 

src/screeninfo.rs

@@ -10,13 +10,13 @@ enum EyePos {
 #[derive(Default, Component)]
 pub struct ScreenInfo {
     pub name: String, // main (to identify the screen)
-    width: f32,       // 3.08    (full width in m)
+    pub width: f32,       // 3.08    (full width in m)
-    height: f32,      // 2.33    (full height in m)
+    pub height: f32,      // 2.33    (full height in m)
 
-    center: Vec3, // 0.0 -1.15 -3.08 (mid point of screen in global coordinated - tracking!)
+    pub center: Vec3, // 0.0 -1.15 -3.08 (mid point of screen in global coordinated - tracking!)
-    normal: Vec3, // 0.0 0.0 1.0      (orientation of front side)
+    // normal: Vec3, // 0.0 0.0 1.0      (orientation of front side)
-    up: Vec3,     // 0.0 1.0 0.0      (vertical axis)
+    // up: Vec3,     // 0.0 1.0 0.0      (vertical axis)
-    horizontal: Vec3, // right vector computed as orthonormal
+    // horizontal: Vec3, // right vector computed as orthonormal
 
 }
 
@@ -28,15 +28,25 @@ impl ScreenInfo {
             height: 2.33,
             center: Vec3 {
                 x: 0.0,
-                y: -1.15,
+                y: 0.0,
-                z: -3.08,
+                z: 0.0,
             },
-            normal: Vec3::Z,
+            // normal: Vec3::Z,
-            up: Vec3::Y,
+            // up: Vec3::Y,
-            horizontal: Vec3::ZERO,
+            // horizontal: Vec3::ZERO,
         }
     }
 
+    pub fn corner_points(&self) -> (Vec3,Vec3,Vec3,Vec3) {
+
+        let lower_left = Vec3::new(self.center.x - self.width * 0.5,self.center.y - self.height * 0.5,0.0);
+        let lower_right = Vec3::new(self.center.x + self.width * 0.5,self.center.y - self.height * 0.5,0.0);
+        let upper_left = Vec3::new(self.center.x - self.width * 0.5,self.center.y + self.height * 0.5,0.0);
+        let upper_right = Vec3::new(self.center.x + self.width * 0.5,self.center.y + self.height * 0.5,0.0);
+
+        (lower_left,lower_right,upper_left,upper_right)
+    }
+
     pub fn build_debug_geometry(
         &self,
         mut commands: Commands,
@@ -70,18 +80,8 @@ impl ScreenInfo {
     //     self
     // }
 
-    fn intersection(&self, p1: Vec3, p2: Vec3) -> (bool, Vec3) {
-        let u = self.normal.dot(self.center - p1) / self.normal.dot(p2 - p1);
 
-        let intersection_point = p1 + ((p2 - p1) * u);
 
-        // returns a tuple if the intersection point is in front and the actual point
-        (u >= 0.0 && u <= 1.0, intersection_point)
-    }
-
-    fn normal_intersection(&self, p1: Vec3) -> (bool, Vec3) {
-        let p2 = p1 - self.normal * 10.0;
-
-        self.intersection(p1, p2)
-    }
 }
+
+

src/utils.rs

@@ -19,27 +19,51 @@ pub fn cycle_msaa(input: Res<Input<KeyCode>>, mut msaa: ResMut<Msaa>) {
     }
 }
 
-pub fn update_offaxis(mut query : Query<(
+// pub fn update_offaxis(mut query : Query<(
-    &mut OffAxisProjection,
+//     &mut OffAxisProjection,
-    &mut Transform,
+//     &mut Transform,
-    &ScreenInfo,
+//     &ScreenInfo,
-    &Viewer
+//     &Viewer
-)>
+// )>
-) {
+// ) {
-    for (mut projection,mut transform,screen_info,viewer) in query.iter_mut() {
+//     for (mut projection,mut transform,screen_info,viewer) in query.iter_mut() {
 
-        // we fake access to far for updating the matrix
+//         // we fake access to far for updating the matrix
-        (*projection).far *= 1.0;
+//         (*projection).far *= 1.0;
 
-        println!("Projection {:?}",*projection);
+//         info!("Projection {:?}",*projection);
         
-        println!("Screen Info {:?}",screen_info.name);
+//         info!("Screen Info {:?}",screen_info.name);
 
-        println!("Viewer {:?}",viewer.position);
+//         info!("Viewer {:?}",viewer.position);
 
-        *transform = Transform::from_translation(viewer.position).with_rotation(transform.rotation);
+//         *transform = Transform::from_translation(viewer.position).with_rotation(transform.rotation);
 
 
 
-    }
+//     }
+// }
+
+
+fn intersection_point( 
+    center_point: Vec3, 
+    normal: Vec3,
+    p1: Vec3, 
+    p2: Vec3) -> (bool, Vec3) {
+    let u = normal.dot(center_point - p1) / normal.dot(p2 - p1);
+
+    let intersection_point = p1.lerp(p2,u); //p1 + ((p2 - p1) * u);
+
+    // returns a tuple if the intersection point is in front and the actual point
+    (u >= 0.0 && u <= 1.0, intersection_point)
+}
+
+fn normal_intersection_point(
+    center_point: Vec3,
+    normal : Vec3,
+    p1: Vec3) -> (bool, Vec3) 
+{
+    let p2 = p1 - normal * 10.0;
+
+    intersection_point(center_point, normal, p1, p2)
 }

src/viewer.rs

@@ -1,7 +1,6 @@
-use bevy::{prelude::*, render::camera::CameraProjectionPlugin, window::PresentMode};
+use bevy::{prelude::*, transform, math::Vec4Swizzles};
 
-use crate::screeninfo::ScreenInfo;
+use crate::{screeninfo::ScreenInfo, offaxis::OffAxisProjection, projection::create_offaxis_matrices};
-// use offaxis::{offaxis_camera_setup, OffAxisProjection};
 
 #[derive(Component, Default)]
 pub struct Viewer {
@@ -29,27 +28,48 @@ impl Viewer {
     }
 }
 
-pub fn simulate_viewer(mut query: Query<&mut Viewer>) {
-    for mut v in query.iter_mut() {
-        //v.position += Vec3::Y * 0.005;
-        v.alpha += 0.01;
-        let radius = 1.5;
 
-        let z_distance = 8.0_f32;
+pub fn apply_viewer_to_projections(mut query: Query<(&Viewer,&ScreenInfo,&mut OffAxisProjection,&mut Transform)>)
+{
+    query.for_each_mut(|(viewer,screen_info,mut offaxis, mut transform)| {
+
+        let eye = viewer.position;
+
+
+        let (lower_left,lower_right,upper_left,_) = screen_info.corner_points();
+
+        // let lower_left = Vec3::new(screen_info.center.x - screen_info.width / 2.0,screen_info.center.y - screen_info.height / 2.0,screen_info.center.z); 
+        // let upper_left = Vec3::new(screen_info.center.x - screen_info.width / 2.0,screen_info.center.y + screen_info.height / 2.0,screen_info.center.z); 
+
+        // let lower_right = Vec3::new(screen_info.center.x + screen_info.width / 2.0,screen_info.center.y - screen_info.height / 2.0,screen_info.center.z);
+
+
+        let (view, projection) = create_offaxis_matrices(lower_left, lower_right, upper_left, eye, 1000.0f32);
+
+        offaxis.projection_matrix = projection; 
+
+        *transform = Transform::from_matrix(view.inverse());
+
+    });
+}
+
+
+pub fn simulate_viewer(mut query: Query<&mut Viewer>,time: Res<Time>) {
+    for mut v in query.iter_mut() {
+        
+        //v.position += Vec3::Y * 0.005;
+        v.alpha += 1.5 * time.delta_seconds();
+
+        let radius = 1.0;
+
+        let z_distance = 2.0_f32;
 
         v.position = Vec3::new(
             v.alpha.sin() * radius,
-            v.alpha.cos() * radius + 1.0_f32,
+            v.alpha.cos() * radius,
             z_distance,
         );
 
-        let vm = Mat4::look_at_rh(v.position, Vec3::ZERO, Vec3::Y);
+        info!("Viewer {:?}",v.position);
-
-        println!("{:?}", vm);
-
-        // view matrices should be orientation only
-        let dir = Quat::from_mat4(&vm);
-
-        v.orientation = dir;
     }
 }